All of our buildings are built from non-corrosive high tensile galvanized steel framework with Zincalume or Colorbond wall cladding and roofing to ensure that your steel garage is made to last.

Our exclusive computerized design package gives us increased accuracy and flexibility of design, so we are able to manufacture buildings of any length, width or height -not just the common sizes.
Common Lengths
3.0 Mt Bays6.0, 9.0, 12.0, 15.0, 18.0, 21.0, 24.0, 30.0
3.5 Mt Bays7.0, 10.5, 14.0, 17.5, 21.0, 24.5, 28.0
6.0 Mt Bays12.0, 18.0, 24.0, 30.0, 36.0, 48.0, 60.0

Common Widths
3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0, 10.5, 11.0, 12.0, 15.0, 18.0

Common Heights
‍2.1, 2.4, 2.7, 3.0, 3.6, 4.2, 4.8, 6.0

Yes, but only to buildings previously supplied by B&G Sheds.

We supply a wide variety of buildings in kit form for the owner builder or total building solutions, complete with all permits, delivery, installation labor and concrete floors.Many of our customers will do some of the project themselves. Some will buy a kit but have us obtain the permits; others will have us install their building but do their own concrete works. We are totally flexible!

Most buildings with a standard building permit take 6-8 weeks from when all information is received. If other permits are required, then expect further delays (build over easement permits 8-10 weeks , town planning permits 8-10 weeks, dispensation or council consent 4-6 weeks)

All works are quoted assuming a clear and level site. Level is considered to be within 75mm from the highest to the lowest point.  It there is a fall the site may need to be filled, cut and filled or excavated. If you have a fall, advise the sales team so that the concreter can arrange to inspect the site prior to construction.
The working area around the building required by the builder for easy use of ladders is 1.2 Mt beyond each wall of the building. When a building is being built adjacent to a boundary, the walls adjacent to the fence will be prefabricated on the ground and tilted into position. This method is available for buildings up to 3.0 Mt high.
To prepare the site for a builder please mow any grassed area, and clear all above ground debris including animal droppings. Please have all animals suitably restrained from the working area. Be sure that there are no overhanging trees interfering with the working area and/or trim trees so that they are a minimum of 1.0 Mt away from the walls and roof of the building. To enable clear access for builders and concrete trucks, please ensure the driveway is clear of all vehicles.